Main Menu
User Functions
Username:

Password:

Don't have an account yet? Sign up as a New User
What's Going On?
There are no upcoming events
Sponsors
Iron City Mx

JMX Racing LLC

101 MX & BDR Racing
Maximum Performance Carolina Allstar Series
Carolina Ultra Series

Trey Kelly MX School

Vortex
Track Finder

Find motocross tracks throughout the US for riding, racing and trails.

Avatars

Spice up your screen name with a cool avatar! They're pre-sized and ready to go. Instructions on how to download and install one are provided.

Get Avatars Here

 Welcome to South East Motocross
 09/08/10 03:13:57 AM

 Forum Index > South East Motocross > Tech Support New Topic
First | Previous | 1 2 3 | Next | Last
  
Topic Subject
 		 Views
 		 Replies
 		 Last Post
 
Normal Topic
lowering?Started by:sprinkles519, Jun/11/10 03:50 PM
i have a rm 250 and i need it lowerd
buttttt i dont wont to lower shock or
chop seat. i was thanking about gettin
the sub frame choped. dose anyone know
how or where i could get it done. its an
rm 250		  
165 1
By: neeley racing
Jun/15/10 10:12 AM
Normal Topic
RM250 hard to startStarted by:simpsc, Mar/07/10 12:24 AM
I have a 2004 RM250 two stroke that is
almost impossible to kick start. Once I
push it off it runs fantastic but
kicking it off cold is not
happening. I have replaced (and
correctly gapped) the plug many
times. The gas was put in this last
summer so 		 
569 19
By: sprinkles519
Jun/11/10 03:54 PM
Normal Topic
Please Help!!! 04' YZ250F TimingStarted by:bmccall136, May/03/10 10:27 PM
I recently freshened up the bike with a
new piston and new valves. After 2
hours of riding I re-adjusted the
valves. I set the exausts at .2 and the
intakes at .1. When I started it up the
idle was very high so I turned it
down...then when I turn the ga		  
128 5
By: bmccall136
May/04/10 09:27 AM
Normal Topic
ENGINE OILStarted by:kx450f, Apr/18/10 01:27 PM
8) I recently bought a 2008 KX450f and
would like to know the best type of oil
to use and how often do I need to change
the filter. I do not race it.		  
211 3
By: mxdad83
Apr/20/10 07:53 PM
Normal Topic
question about rear shockStarted by:punkin1957, Mar/23/10 09:38 PM
My son's 05 yz250 rear shock has no
compression it went down and did not
come back up he pulled it back up it
is not leaking oil .Does anyone know
what could be wrong and about how much
it would cost to fix it		  
183 5
By: privateerconnect
Mar/24/10 11:15 AM
Normal Topic
Tire PressureStarted by:bmccall136, Mar/18/10 03:38 PM
I've heard a dozen different opinions on
what tire pressure to run in the mud,
hard packed, etc. Some people claim
that your should run less in the mud to
get more traction and I've even heard
some say that more pressure allows the
tire to get down to the		  
192 4
By: JoJmoto
Mar/18/10 09:21 PM
Normal Topic
2 STROKE-4STROKEStarted by:kawi22, Feb/22/10 06:38 PM
Right now I have a yz125. We been
thinking about getting a 250 just to get
the feel of it for my next bike. Which
would you recommend, 250 2 stroke or 250
4 stroke?		  
353 7
By: redryder
Feb/25/10 05:06 PM
Normal Topic
rear master cylinderStarted by:punkin1957, Feb/16/10 09:32 PM
We have a 2005 yz 250 and rebuilt the
rear master cylinder because it was
leaking and it is still leaking .Does
anyone have any suggestions on what to
do?		  
91 1
By: 32fun
Feb/16/10 09:50 PM
Normal Topic
2002 RM 250 Gearing RecommendationsStarted by:bc728, Dec/06/09 09:14 PM
Does anyone know what the stock front
and rear sprockets are for a 2002 RM
250? bc728 		 
177 5
By: tbready
Feb/06/10 10:39 PM
Normal Topic
Stripped ScrewStarted by:JoshuaP, Jun/09/09 06:53 PM
I have a stripped screw on one of the
bolts that hold the radiator shroud on.
The problem is I think that the hole in
the side of the tank is the stripped
part. Does anyone have any
recommendations? It is an 07 Yz250f.
The bolt is turning just not going		  
436 7
By: neeley racing
Feb/03/10 03:32 PM
Normal Topic
RM85-RM85LStarted by:sprinkles519, Oct/10/09 08:45 PM
I have a RM85. im wonting to change it
to a RM85L. what parts do i need? if you
have the parts i need i may work out a
deal. thanks 		 
180 4
By: LYNN HOBBS
Oct/13/09 12:09 PM
Normal Topic
sprocket sizingStarted by:lilcane88, May/24/09 05:10 PM
At Strawberry Hill on my rm85 ive
noticed that I dont have enough topend
in 3rd gear to get over the table tops.
But in 4th i dont have enough low end to
make it either. I've tried slipping the
clutch and a few different lines but
havent tried seat bouncin		  
191 6
By: lilcane88
May/24/09 09:30 PM
Normal Topic
SX65 oil leak around shifterStarted by:TedLieb, May/17/09 11:54 PM
I have an oil leak on an 07 around
the seal where the rod comes out for the
shift lever. Does anyone know if the
seal can be replaced without pulling the
motor apart? Any tips on repairing this
problem would be greatly appreciated!		  
181 4
By: TedLieb
May/18/09 09:14 PM
Normal Topic
backfiring 250fStarted by:lilcane88, May/08/09 08:51 PM
i have a 04 rmz250 (great bike) and
noticed it was backfiring severely. So,
i bought a new seal that goes where the
header meets the silencer. got it
installed and it still backfires.
checked the air boots and there is no
leak there. it has a 180 main jet 		 
378 9
By: lilcane88
May/13/09 07:06 AM
Normal Topic
SX65 fork oil levelStarted by:TedLieb, May/02/09 08:57 PM
I replaced the seals in one of our
65's today which was a first for me with
inverted forks. Once I had everything
figured out and back together I could
not find any info on what fork oil to
use (other than manuel saying 5wt), the
quanity or how to check		  
219 6
By: TedLieb
May/06/09 01:41 AM
Normal Topic
a shot in the darkStarted by:JOSH, May/05/09 09:00 PM
does anyone have the stock suspension
settings for a 96 kx 250 handy???? 		 
189 1
By: JoJmoto
May/05/09 09:14 PM
Normal Topic
Tech Help NeededStarted by:Nemesis, May/04/09 08:44 PM
I've got to replace the clutch in a RM65
but when i try to remove the clutch hub
bolt the plates don't have enough
pressure to break the hub bolt loose.
Anyone got any tricks to break this
sucker free?		  
239 5
By: troy crisp
May/05/09 09:39 AM
Normal Topic
I NEED HELPStarted by:lilcane88, Apr/17/09 07:07 PM
my 2007 rm85 is overheating very
quickly. just changed piston rings
yesterday and did a heat cycle.
everything was fine. now the bike
overheats within a minute of warming up.
checked impeller and it turns		  
312 9
By: 424
Apr/19/09 11:11 PM
Normal Topic
Need KX85 race sag setting..Started by:JoJmoto, Apr/03/09 07:19 PM
In the book it says to set the rear
spring to a preset hight from the center
of the eye bolt hole to the spring.
After doing this, I end up with about 3
1/2 inches of sag, Is this too much,
should it be 3" instead?		  
134 2
By: JoJmoto
Apr/03/09 09:06 PM
Normal Topic
carbureatorStarted by:kawi22, Mar/24/09 04:04 PM
i have a 2004 kx 85.My bike will idle
for a second or two and then cut off. We
have tried adjusting both screws on the
carb and will not change at all. Any
tips on what we can do.		  
211 2
By: kawi22
Mar/24/09 06:29 PM
Normal Topic
Need help. Xr50Started by:tc218, Mar/23/09 12:51 PM
I have a xr50 and it wont start for
nothing. low compresion and just wont
turn over. Do i need to replace the top
or what?		  
141 1
By: knobbiesmx
Mar/23/09 03:10 PM
Normal Topic
exhaust kitStarted by:kawi22, Mar/15/09 09:44 PM
NEEDED:new or used kx 85 02-08
procircuit exhaust kit.		  
132 0
By: kawi22
Mar/15/09 09:44 PM
Normal Topic
Cylinder workStarted by:waz#7, Jan/04/09 05:49 PM
Okay, I'm doing a top end on my YZ 250.
I noticed the nikasil however you spell
that, needs replaced. Does anyone know
of a company near Charlotte, kings
Mountain area or even Spartanburg area
that does this? Thanks, Waz		  
344 6
By: privateerconnect
Feb/04/09 11:29 AM
Normal Topic
Need help! Cobra 50Started by:redryder, Jan/31/09 11:39 AM
friend has a King Corba 50. kick start
is not working but i need some sort of
manual to find out what part or parts i
need. Looks as if the bolt that holds
the clutches on is missing and it
appears that some sort of gear was
suppose to be there also. Someo		  
216 6
By: redryder
Feb/02/09 09:48 AM
Normal Topic
Anyone have any personal experience w...Started by:Honda21, Jan/06/09 07:06 PM
I got some AMSOIL Formula 4-StrokeŽ
0W-40 Synthetic Motor Oil at a awards
banquet. I was wanting to give it a try
in my 06 CRF450R. Has anyone else ever
tried this oil in their engine? I
currently use Motorex. Looking for good
or bad info about this oil 		 
323 9
By: Honda21
Jan/20/09 07:45 PM
Normal Topic
big bore kit for yz 125Started by:punkin1957, Dec/28/08 11:11 PM
Does anyone have info on what to do to
the case because it hits on the
downstroke and will not make a complete
rotation.Thanks!		  
142 1
By: troy crisp
Dec/29/08 08:34 AM
Normal Topic
how to remove a bearing Started by:punkin1957, Dec/04/08 06:10 PM
My son has 2005 yz 125 the bearing we
are trying to remove is the bearing
that push lever assembly sits in . It
is in the case on the the flywheel side.
It is where the clutch cable attaches
to the push lever that operates the
push rod that goes thru 		 
146 1
By: troy crisp
Dec/04/08 06:47 PM
Normal Topic
ohlins shockStarted by:punkin1957, Oct/26/08 09:34 PM
Does anyone know the guy that works on
onlins rear shock		  
226 3
By: JCagle
Oct/27/08 12:27 PM
Normal Topic
clutch problemsStarted by:punkin1957, Jul/11/08 10:57 PM
Has anyone had clutch rod problems with
a yz 125 it is a 2005 model 		 
281 3
By: troy crisp
Jul/12/08 12:27 PM
Normal Topic
shopsStarted by:mxthumper, Jul/06/08 03:28 PM
Hi all, new here. I live in Rock Hill
SC was wondering if anybody can suggest
a good shop in the area.		  
253 1
By: privateerconnect
Jul/06/08 05:41 PM
Normal Topic
DOnt stay runningStarted by:crazy31, Jun/18/08 10:17 PM
I have a 2005 bombardier ds50 and 2005
suzuki z250 that hasn't ran in about a
year. I put new batteries, drained the
old gas put new in and cleaned the
carbs. But they still won't stay
running.........................Can
anyone help All sugguest/replies 		 
262 1
By: JoJmoto
Jun/21/08 06:23 PM
Normal Topic
carb mods for bogging on crf 250Started by:bcartee917, Apr/24/08 01:49 PM
i just got an 08 and heard some stuff
about things you can do to the carb to
cut out the bogging it has, my 07 didnt
have any probs but this 08 has a slight
bog to it everynow and then. i talked to
some people at the track and they told
me about taking the		  
242 2
By: bcartee917
Apr/24/08 10:29 PM
Normal Topic
Hour Meter on CRF250Started by:clemsonclint, Apr/21/08 01:58 PM
I've tried to install 2 different(brand
new) hour meters on my 07 CRF 250.
Neither will come alive and start
working. I'm thinking the spark plug
wire has a sleeve on it that is too
thick and blocking the current to the
hour meter wire. Any sugestions?		  
241 2
By: clemsonclint
Apr/22/08 09:59 PM
Normal Topic
redryderStarted by:bcartee917, Mar/30/08 02:16 PM
hey do you know who they used for
shipping at the dealer, and how much did
it cost you?		  
297 2
By: bcartee917
Mar/31/08 10:00 AM
Normal Topic
aonia qualifier photosStarted by:bcartee917, Mar/29/08 07:53 PM
does anyone know who was there takin
pictures		  
225 1
By: kawiman
Mar/29/08 08:02 PM
Normal Topic
101 mx picturesStarted by:bcartee917, Mar/26/08 10:50 PM
some guy was there taking pictures, does
anyone know who that was and if he has a
website		  
258 1
By: bcartee917
Mar/27/08 05:08 PM
Normal Topic
KX 65 suspension...Started by:wcm4804, Feb/12/08 03:48 AM
Who can I get to do the suspension on my
sons bike? I'm in the greenville area.		  
282 4
By: troy crisp
Feb/12/08 06:51 PM
Normal Topic
crf cam boltStarted by:bcartee917, Jan/25/08 12:31 PM
i need the short bolt that goes in the
back of the cam holder on a 07 crf 250r,
its a 7x20mm so im pretty much screwed
for the wkend, i have called everywhere,
from dealerships and nut and bolt
places, no one has it, just goes with
all the other luck i hav		  
224 3
By: bcartee917
Jan/26/08 01:27 PM
Normal Topic
Gripper seats and AMA Supplemental RulesStarted by:Hawkman, Jan/14/08 07:25 PM
Ok, it looks like gripper seat covers
are ok for AMA racing in 2008. Anybody
in the know want to confirm? I read the
supplemental rules but it wasn't crystal
clear. Hawkman		  
372 2
By: Hawkman
Jan/16/08 11:24 PM
Normal Topic
Cam Installation and Adjustment Video'sStarted by:Honda21, Dec/31/07 03:38 PM
For Your Info: @
[url]http://www.hotcamsinc.com/[/url]
You can see video's on HotCam (or
stockcam) installation on [b]Honda
CRF450[/b] and other single cam models.
Also HotCams (or Stockcams) installation
on [b]Yamaha YZ250F[/b] and other Dual
Overhead cam		  
182 0
By: Honda21
Dec/31/07 03:38 PM
First | Previous | 1 2 3 | Next | Last

 All times are EDT. The time is now 03:13 AM.
Normal Topic Normal Topic
Locked Topic Locked Topic
Sticky Topic Sticky Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Able to post 
Filtered HTML Allowed 
Censored Content 

 Copyright © 2010 South East Motocross
 All trademarks and copyrights on this page are owned by their respective owners.		 Powered By MotoGraphic Media, LLC  
Created this page in 0.25 seconds